Black+Decker BCHV001 Vacuum Cleaner User Manual

View or download Black+Decker BCHV001 Cordless Handheld Vacuum PDF user manual. Get help to unpack, install, using, maintenance and troubleshooting the vacuum with instruction manuals.

Table of contents

  1. Product component overview
  2. Safety instructions
  3. Batteries and Charger
  4. Storage Recommendations
  5. Battery Pack Cleaning Instruction
  6. Assembly and adjustment
    1. Removing dust bowl
    2. Installing dust bowl
    3. Installing accessories
  7. Operation
    1. Installing and removing battery pack
    2. On/off switch
  8. Maintenance
    1. Cleaning/Emptying the Dust Bowl and Filters
    2. Replacing the filters
  9. Repairs

Download Black+Decker BCHV001 Vacuum Cleaner User Manual

Black+Decker BCHV001 Vacuum Cleaner User Manual PDF manual download - Free user guide from GManuals
Brand Black+Decker
Model BCHV001
Category Vacuum Cleaner

File Size 1.5 Mb
Pages 10 pages
Language English
330 views

Cleaning the Filters

Removing pre-filter

  1. Place the vacuum over a trash bin and remove the dust bowl from the main housing by pressing the dust bowl release button on the handle and remove
    the dust bowl by pulling the dust bowl away from the main housing.
  2. Remove the filter assembly by pulling it out of the dust bowl.
  3. Twist counterclockwise and pull the preā€‘filter to seperate it from the filter
  4. Remove the preā€‘filter and shake or lightly brush any dust from the filter and preā€‘filter.
  5. Empty any dust from the dust bowl into a trash bin and wash if necessary. Ensure that the dust bowl is completely dry before using.
  6. Wash the preā€‘filter and filter regularly using warm, soapy water. Ensure that both are completely dry for 12 hours before using.
  7. Install the preā€‘filter onto the filter, ensuring the filter tabs aligns with the preā€‘filter slots and rotate the preā€‘filter clockwise to lock it firmly into position.
  8. Install the filter assembly into the dust bowl.
  9. Install the dust bowl onto the main housing and lock it firmly into position.

Cleaning the Filter

IMPORTANT: Maximum dust collection will only be obtained with a clean filter and an empty dust bowl. If dust begins to fall back out of the product after it is switched off, this indicates that the bowl is full and requires emptying.

  1. Once the filter and preā€‘filter are removed from the dust bowl shake off or lightly brush any dust from the preā€‘filter and filter
  2. Rinse out the dust bowl with warm soapy water.
  3. Wash the filters regularly using warm, soapy water and ensure that it is completely dry before using again. The cleaner the filter is, the better the product will perform.
  4. It is very important that the filters are completely dry and correctly in position before use.
  5. Ensure the filters are completely dry for 12 hours before refitting.
  6. Follow instructions in the Removing Preā€‘Filter section for assembly instructions.

Replacing the Filters

The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your BLACK+DECKER dealer.

  1. Remove the old filters as described in Cleaning/ Emptying the Dust Bowl and Filters.
  2. Fit the new filters as described in Cleaning/Emptying the Dust Bowl and Filters.
  3. Only use BLACK+DECKER replacement filter: HLVCF10

Give a Review

(will not be published)


Are you human?